Please see the following picture with the corresponding input.Inside program version 2020 there is a new featuer inside the task “”CSM Bridge Design - Beams””.This task enables you to perform a fatigue design check in an easy way.Just for information here we describe the manual workflow with a “Text Editor (TEDDY)” task. Structural Bridge Design bridge analysis software integrates loading, analysis, and code checking (AASHTO LFRD, EURO-CODES, and more) throughout the project. 5.2.4 PUNCHING SHEAR (ULS) 118 .

Based on the regulations of the eurocode, it is necessary to define design combinations including forces and moments from permanent loads, prestressing, creep and shrinkage and also from temperature and settlement loads. © Copyright 2020 Autodesk, Inc. All rights reserved.

5.3.1 MAIN FEATURES OF THE … Concrete Bridge Design: Conception to Fabrication 5.3 Second order effects in the high piers .
This tutorial is an add on to the “Post Tensioned Concrete Beam Bridge” Tutorial. This class will cover concrete bridge modeling in the context of a wider transportation project. In our case we want an evaluation of the FLM3 from the center lane.

This design example illustrates the Empirical Design Method for composite concrete bridge decks specified in Article 9.7.2 of the AASHTO LRFD Bridge Design Specification. For the necessary treatment of the damage equivalent factor for fatigue λ_s, according to Annex NN of EN 1992-2:2005, there is a special input within the BEAM record.

You will also learn how to transfer the refined bridge model to Revit, where you will add 3D reinforcement using new rebar tools and finally produce drawings and rebar scheduling ready for fabrication. You need to be familiar with the tutorial “Post Tensioned Concrete Beam Bridge” as well.Live load analysis including Fatigue Load Model FLM3All other workflow steps are equal to the steps described in the To perform the fatigue design we need to define a new user defined action FAT inside the load case manger of SOFiPLUS.The workflow is the same as already explained in the Next you define a new load group and define the evaluation cases.

116 . The class will explore fast conceptual bridge modeling in InfraWorks software, and workflows to Structural Bridge Design software, Inventor software, and Revit software. This class will cover concrete bridge modeling in the context of a wider transportation project. Design, Share, and Collaborate: Bridge Design with InfraWorks and BIM 360 5.2.3 LONGITUDINAL REINFORCEMENT VERIFICATIONS .

The fatigue design must be checked for every possible combination. Please add a new load train inside the tab “Load Trains” Concrete bridge design (EN 1992-2) 5.1 Introduction . This forces and moments will be combined with the results from the FLM3 model.

Advance Steel for BIM: Seamless Workflow from Design to Fabrication

You will learn how to rapidly model concrete bridges in InfraWorks and use the “built-in” analysis tools to assess the suitability of the chosen girder system against recognized design standards.

The workflow is the same as already explained in the Post Tensioned Concrete Beam Bridge tutorial.


Six Manual Bridge Designs: Six different detailed bridge design in word documents of reinforced concrete bridges.

99 . This can be done inside the SSD task “Traffic Loader”. You will learn how to use Inventor to refine the InfraWorks bridge model by creating custom parametric bridge components for use in InfraWorks, and you’ll see how to configure them to act as native parts.